Maintenance - Pure Crystal Water Fountain

How to maintain your Pure Crystal

How to maintain your Pure Crystal > Pure Crystal Bloom 1.8L for Dog and Cat / Pure Crystal Bloom 2.3L for Dog , Cat and Multiple Cats

Pure Crystal Bloom 1.8L for Dog and Cat / Pure Crystal Bloom 2.3L for Dog , Cat and Multiple Cats

How to maintain

Remove top funnel

Remove filter media

Remove filter tray

Remove cord with
pump from base tank

Rinse and clean

Rinse top funnel, filter tray, base tank and cord cover with water. If you cannot clean off thoroughly, cleanse with mild detergent using sponge.

* Do not use cleansers. Rinse thoroughly.

How to maintain filter

Rinse filter surface with running water. Make sure not to use detergent.

* Replace filter media approximately once a month or when the filter is contaminated with left over food and hair.

* Filter may be seen in pink due to the germs existing in natural environment. We strongly advise filter and unit to be maintained thoroughly and water to be exchanged frequently under hot summer climates.

How to maintain pump

Remove pump cover

Remove impeller cover

Remove impeller

How to remove pump cover

Remove pump cover by holding pump as illustration and add pressure in the direction of arrows.

Pump structure

Rinse impeller

Rinse impeller and clean inside of pump with cotton swab.

Impeller not clean	Residue impeller caught

*Impeller will not function properly if impeller is contaminated with hair and left over food.

If impeller cannot revolve, it will become locked and stop the water flow. Be sure to maintain the impeller once a month.

* The impeller magnet will become weak after long usage which will diminsh the pump power.
We recommend the pump to be replaced once a year.
* Kindly contact your nearest store for replacement pump which is sold separately.

After maintenance is finished,
reverse procedure to re-set the unit.