Maintenance - Pure Crystal Water Fountain

How to maintain your Pure Crystal

How to maintain your Pure Crystal > Pure Crystal Ceramics

Pure Crystal Ceramics

  • UnitUnit
  • Replacement FilterReplacement Filter
  • PumpPump

How to maintain

1 Remove top funnel

Remove top funnel
2 Remove filter media

Remove filter media
3 Remove cord with
pump from base tank

Remove cord with pump from base tank

How to maintain filter

専用フィルターのお手入れ方法
Rinse filter surface with running water. Make sure not to use detergent.

* Replace filter media approximately once a month or when the filter is contaminated with left over food and hair.

* Filter may be seen in pink due to the germs existing in natural environment. We strongly advise filter and unit to be maintained thoroughly and water to be exchanged frequently under hot summer climates.

How to maintain pump

How to maintain pump
1 Remove pump cover

Remove pump cover
Remove pump cover
2 Remove impeller cover

Remove impeller cover

How to remove pump cover

How to remove pump cover
Remove pump cover by holding pump as illustration and add pressure in the direction of arrows.

Pump structure

Pump structure
3 Remove impeller

Remove impeller

4 Rinse impeller

Rinse impeller Rinse impeller

Rinse impeller and clean
inside of pump with cotton swab.

Rinse impeller

Rinse impeller and clean inside of pump with cotton swab.

If impeller cannot revolve, it will become locked and stop the water flow. Be sure to maintain the impeller once a month.


* The impeller magnet will become weak after long usage which will diminsh the pump power.
  We recommend the pump to be replaced once a year.
* Kindly contact your nearest store for replacement pump which is sold separately.

After maintenance is finished,
reverse procedure to re-set the unit.

Maintenance caution

Be aware of losing silicon cover.

Be aware of losing silicon cover.Be aware of losing silicon cover.
Be aware of losing silicon cover. Be aware of losing silicon cover.


Be aware of losing suction cup for pump cover. (Pump cover is detachable)

Be aware of losing suction cup for pump cover. (Pump cover is detachable)


Place pump firmly where red circles are drawn after passing power cord through a hole on base tank.

Place installing suction cup  Place firmly
Place installing suction cup Place firmly

*Be aware of direction of installing pump and place firmly by suction cups.



Install how you can see water supply outlet.

Water supply outlet can be seen Water supply outlet cannot be seen
Water supply outlet can be seen Water supply outlet cannot be seen

PAGETOP